Casting (Meta Quest)

Option 1: Cast to Browser/Computer #

1. Put on your Meta Quest headset
2. Press the Meta button on your right Touch controller to open the universal menu
3. Select ‘Sharing’ (monitor icon) from the quick settings panel
4. Select ‘Cast’
5. In the casting menu, select ‘Computer’
6. On your computer, open a web browser and navigate to oculus.com/casting
7. Log in with your Meta/Facebook account
8. Click ‘Start Casting’ when prompted
9. Accept the casting prompt in your headset

Important Notes:

• Your Meta Quest and computer must be on the same WiFi network
• Use a strong, stable WiFi connection for best performance
• Supported browsers: Chrome, Microsoft Edge, or Firefox
• Make sure you’re logged into the same Meta account on both devices

To Stop Casting:

1. Open the universal menu in your headset
2. Select ‘Sharing’
3. Select ‘Stop Casting’

• Alternatively, click ‘Stop Casting’ on the browser window

Option 2: Cast to TV/Chromecast #

Initial Setup

1. Ensure your TV has a compatible Chromecast device or built-in Chromecast
2. Make sure your Chromecast is set up and connected to the same WiFi network as your Quest

Casting Steps

1. Press the Meta button on your right Touch controller
2. Select ‘Sharing’ from the quick settings
3. Select ‘Cast’
4. Choose your Chromecast device from the list of available devices
5. Accept the casting confirmation in your headset

Cast to Mobile Device

You can also cast to the Meta Quest mobile app:

1. Open the Meta Quest app on your phone
2. Tap the casting icon in the top right
3. Select your headset
4. Accept the casting prompt in your headset

Option 3: Cast through ArborXR #

When your Meta Quest is managed by ArborXR:

1. In ArborXR Kiosk Mode:
   • Navigate to the side menu
   • Locate and click the “TV” or Cast icon
   • Select “Cast to Browser” from the casting options
2. For Browser Casting:
   • Note the displayed IP address
   • Enter this IP address in your web browser
   • Ensure your Quest and the computer are on the same WiFi network
   • Click “Start Screencast” on the welcome page
   • Return to ArborXR Kiosk mode using the back arrow
   • Select “Continue” to return to ArborXR Kiosk window
3. To Stop ArborXR Casting:
   • Return to the Cast menu
   • Select “End” on the right side of the window
4. ArborXR-Specific Notes:
   • The device name shown in the lower left is auto-generated
   • This name is separate from your standard device naming schema
   • Ensure stable WiFi connection for optimal streaming
   • Both devices must remain on the same network throughout casting

ArborXR Best Practices

• Verify ArborXR permissions are properly configured
• Check network stability before initiating cast
• Keep headset charged above 50% for stable casting
• Monitor WiFi signal strength throughout session
• Close unnecessary background applications

Troubleshooting Tips #

Common Issues

1. Cast Not Working:
   • Verify all devices are on the same WiFi network
   • Check your WiFi signal strength
   • Restart your headset and casting device
   • Update your Quest software if needed
2. Poor Quality:
   • Move closer to your WiFi router
   • Reduce WiFi interference from other devices
   • Consider using a 5GHz WiFi network if available
   • Lower the casting resolution in settings if needed
3. Connection Drops:
   • Check WiFi stability
   • Ensure your headset has sufficient battery
   • Close other apps running on the casting device

Quest Best Practices #

• Keep your Quest headset within good WiFi range
• Use a 5GHz network when possible, for better streaming quality
• Close unnecessary background apps on your casting device
• Keep your Quest software updated
• Consider router placement and potential interference